V-belt Optibelt XPZ 1387
- Brand
- OPTIBELT
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- XPZ
- Series
- Super X-Power M=S
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Other brands for this category
Ask us for alternatives. We check every equivalent against the part number and your application.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
OPTIBELT XPZ 1387 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for XPZ 1387 and any equivalents.
A new belt will not correct a worn drive. The Optibelt XPZ 1387 Super X-Power M=S is a cogged narrow V-belt with profile XPZ and a length of 1387 mm. Before you fit it, inspect the sheaves and the rest of the drive so the replacement runs as intended.
Check each sheave groove for wear, rust, burrs and embedded debris. A groove that has worn wider lets the belt sit too deep, which reduces grip and shortens belt life. Look for cracks, chips or a step at the bottom of the groove, and confirm the sheaves are aligned and the shafts turn freely.
Examine the old belt for the failure pattern. A single broken belt, heavy sidewall wear or a glazed surface can point to a misaligned drive, a worn sheave or a tension problem rather than a belt defect. On a multi-belt drive, replace all belts as a set so the load is shared evenly.
The Optibelt XPZ 1387 carries profile XPZ and a length of 1387 mm. The same size is also listed under Gates XPZ 1387. Send the part number, the quantity and the drive details by WhatsApp or email and the MR team will confirm the belt or suggest an equivalent.
The Optibelt XPZ 1387 Super X-Power M=S is a cogged narrow V-belt with profile XPZ and a length of 1387 mm. The same size is also listed under Gates XPZ 1387. Send the part number and quantity by WhatsApp or email and the MR team will confirm the right belt or suggest an equivalent.
Dimensions
- Section
- XPZ
- Length
- 1387mm
Frequently asked questions
- What should I check on the drive before fitting the Optibelt XPZ 1387?
- Inspect the sheave grooves for wear, rust and debris, confirm the sheaves are aligned, and check that the shafts turn freely. Correct any worn or damaged sheave before installing the new belt.
- Can I replace just one belt on a multi-belt drive?
- No. On a multi-belt drive, replace all belts as a set so the load is shared evenly and the new belt does not take more than its share.
- How do I request a quote for the Optibelt XPZ 1387?
- Send the part number and the quantity you need by WhatsApp or email. The MR team will confirm the belt or suggest an equivalent.