V-belt Optibelt XPA 800
- Brand
- OPTIBELT
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- XPA
- Series
- Super X-Power M=S
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Other brands for this category
Ask us for alternatives. We check every equivalent against the part number and your application.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
OPTIBELT XPA 800 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for XPA 800 and any equivalents.
This page covers the Optibelt XPA 800 Super X-Power M=S, a cogged narrow V-belt with an XPA profile and an 800 mm length. It is intended for maintenance and purchasing teams who need to match a belt that is being replaced.
The most reliable way to match this belt is to read the marking on the back of the belt you are removing. Confirm the profile is XPA and the length is 800 mm, then compare both against the Optibelt XPA 800. If the old belt is worn or the marking is unreadable, measure the length and check the profile before ordering.
A cogged narrow V-belt of this profile and length is often used on drives where space is limited and the belt runs over small pulleys. When you replace it, inspect the pulleys for wear, alignment and any debris in the grooves. Also check the tensioner and the condition of the other belts on the same drive.
If you are unsure whether the XPA 800 is the correct replacement, send the part number you have, the profile and the length you measured, and any photos of the old belt and the drive. The team at MR Industrial Accessories can confirm the right belt or suggest an equivalent.
Dimensions
- Section
- XPA
- Length
- 800mm
Frequently asked questions
- How do I confirm the Optibelt XPA 800 is the right belt for my drive?
- Check the marking on the back of the belt you are replacing. It should show the profile XPA and the length 800 mm. If those match, the Optibelt XPA 800 is the correct profile and length.
- What should I send to get a quote for the Optibelt XPA 800?
- Send the part number XPA 800, the profile XPA and the length 800 mm. If you have the old belt, include a photo of the back marking and the drive. You can send this by WhatsApp or email.
- Can you help if the belt I remove is not marked XPA 800?
- Yes. Send the part number or any marking you can read, along with the measured length and a photo of the belt and pulleys. The team can help confirm the right belt or suggest an equivalent.