V-belt Optibelt XPA 1700 XEP
- Brand
- OPTIBELT
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- XPA
- Series
- Super XE-Power Pro M=S
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
OPTIBELT XPA 1700 XEP belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for XPA 1700 XEP and any equivalents.
The Optibelt XPA 1700 XEP is a cogged narrow V-belt in the XPA profile with a 1700 mm length. It belongs to the Super XE-Power Pro M=S series. When replacing a belt, confirm both the profile and the length against the belt you are removing.
To match this belt to the one being replaced, read the marking on the back of the old belt. Look for the profile (XPA) and the length (1700 mm). The XPA profile and 1700 mm length are the two key dimensions for this Optibelt belt. If the old belt is worn or the marking is unreadable, measure the outside length and compare it to 1700 mm.
A cogged narrow V-belt like this one is used where a standard narrow V-belt would run. The cogged construction helps with bending and heat dissipation, but the profile and length must match the drive. Never force a belt onto a pulley; if it does not seat correctly, the profile or length is likely wrong.
If you are unsure whether the XPA 1700 XEP is the correct replacement, send a photo of the old belt's marking and the drive details to our team. We can help confirm the profile and length or suggest an equivalent. We carry Optibelt belts and serve maintenance, engineering and purchasing professionals across the United States, Canada, Mexico and South America.
Dimensions
- Section
- XPA
- Length
- 1700mm
Frequently asked questions
- How do I confirm the XPA 1700 XEP is the right belt for my drive?
- Check the marking on the back of the belt you are replacing. It should show the XPA profile and a 1700 mm length. If the marking is missing, measure the belt length and compare it to 1700 mm.
- What does the XPA profile mean for fit?
- The XPA profile is the cross-section shape of the belt. It must match the pulley groove. A different profile will not seat correctly, even if the length is the same.
- Can you help if I cannot read the old belt marking?
- Yes. Send a photo of the old belt and any drive details to our team. We can help confirm the XPA profile and 1700 mm length or suggest an equivalent.