V-belt Optibelt XPA 1272
- Brand
- OPTIBELT
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- XPA
- Series
- Super X-Power M=S
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Other brands for this category
Ask us for alternatives. We check every equivalent against the part number and your application.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
OPTIBELT XPA 1272 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for XPA 1272 and any equivalents.
The Optibelt XPA 1272 is a cogged narrow V-belt in the XPA profile, 1272 mm long, from the Super X-Power M=S series. Cogged narrow V-belts are used on industrial drives where a compact cross-section and flexibility around small pulleys are needed, such as fan, pump and compressor drives. To confirm fit, match both the profile (XPA) and the length (1272 mm) to the belt you are replacing.
The XPA profile is a narrow wedge cross-section. A belt in this profile is not interchangeable with a classical V-belt or with another narrow profile such as XPZ or XPB, even if the length appears close. The 1272 mm length is the datum length for this belt. If the marking on the old belt is worn, measure the outside length and check the profile with a belt gauge before ordering.
Cogged narrow V-belts are common on drives that run at higher speeds or use smaller pulleys, where the molded cogs help the belt bend. When you replace one, inspect the pulleys for wear, alignment and correct groove profile, and check that the tension is set to the drive manufacturer's specification. If a drive uses multiple belts, replace them as a set so the load is shared evenly.
We carry the Optibelt XPA 1272 for maintenance, engineering and purchasing teams. To request a quote, send the part number XPA 1272 by WhatsApp or email. If you are unsure whether this is the correct belt, include the drive make and model, the pulley diameters and the old belt marking, and we will help confirm it or suggest an equivalent.
Dimensions
- Section
- XPA
- Length
- 1272mm
Frequently asked questions
- How do I confirm that the Optibelt XPA 1272 fits my drive?
- Check the old belt for the profile and length marking. This belt is XPA profile and 1272 mm long. If the marking is unreadable, measure the outside length and identify the cross-section with a belt gauge. The profile and length must both match.
- Can I replace an XPA belt with a different profile?
- No. XPA is a specific narrow wedge profile. Other narrow profiles such as XPZ or XPB have different cross-section dimensions and will not sit correctly in the pulley grooves, even if the length is the same.
- What information should I send with my quote request?
- Send the part number XPA 1272. If you want us to confirm the fit, also include the drive make and model, pulley diameters and the marking from the old belt. We will reply promptly.