Timing belt Optibelt XL 174
- Brand
- OPTIBELT
- Category
- Power transmission
- Subcategory
- Timing belts
- Series
- ZR
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
OPTIBELT XL 174 belongs to timing belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for XL 174 and any equivalents.
The Optibelt ZR XL 174 is a timing belt with an XL profile and a length of 441.96 mm. It is used in low-power synchronous drives where the belt's teeth mesh with matching pulleys to maintain timing between shafts.
Timing belts like this XL profile belt are common on light-duty drives in packaging, labeling, office equipment, and small conveyors. The XL profile is a standard inch-pitch tooth form, and the 441.96 mm length is the datum length for the belt. To confirm fit, check that the old belt's back is marked XL 174, then count the teeth and measure the length if the marking is worn.
When the belt is removed, inspect the pulleys for worn teeth, debris in the grooves, and proper alignment. A new belt should sit fully in the pulley grooves without bottoming out. If the drive uses more than one belt, replace all belts at the same time to keep loads even. For a quote, send the part number XL 174 and the quantity you need by WhatsApp or email; we will confirm the belt and can suggest an equivalent if needed.
Dimensions
- Profile
- XL
- Length
- 441.96mm
Frequently asked questions
- How do I confirm this is the right belt for my drive?
- Look for the marking XL 174 on the back of the old belt. If it is not legible, measure the length and check that the profile matches the pulley grooves. The profile is XL and the length is 441.96 mm.
- What should I include when requesting a quote?
- Send the part number XL 174, the quantity, and any details from the old belt's marking. Photos of the belt and pulley can help us confirm the correct item.
- Can I replace just one belt on a multi-belt drive?
- On drives with more than one belt, it is best to replace all belts at the same time. This keeps tension and load sharing even across the drive.