Timing belt Optibelt XL 118
- Brand
- OPTIBELT
- Category
- Power transmission
- Subcategory
- Timing belts
- Series
- ZR
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
OPTIBELT XL 118 belongs to timing belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for XL 118 and any equivalents.
The Optibelt ZR XL 118 is a timing belt with an XL profile and a length of 299.72 mm. It is used in synchronous drives where the belt teeth mesh with pulley grooves to maintain timing between shafts. This page covers how to match the belt to the one you are replacing.
To confirm the Optibelt ZR XL 118 is the correct belt, check the marking on the back of the belt you are removing. The part number and profile should match: XL profile and 299.72 mm length. If the old belt is worn or the marking is unreadable, measure the length and count the teeth, then compare those values to the data above.
The XL profile determines the tooth shape and pitch, while the 299.72 mm length sets the center distance in the drive. Both must match the pulleys and the original belt. If you are unsure, send a photo of the old belt marking along with your equipment details when you request a quote.
Timing belts are often replaced as part of scheduled maintenance. Inspect the pulleys for wear or debris and check the tensioner before installing a new belt. If the drive uses multiple belts, confirm whether they should be replaced as a set.
Dimensions
- Profile
- XL
- Length
- 299.72mm
Frequently asked questions
- How do I confirm the Optibelt ZR XL 118 matches my old belt?
- Compare the part number, profile (XL) and length (299.72 mm) on the back of the old belt. If the marking is gone, measure the length and count the teeth, then send those details with your quote request.
- Can you help if I only have the old belt to go by?
- Yes. Send a photo of the old belt marking or provide the profile and length you measure. We can help confirm the right belt or suggest an equivalent.
- What information should I include with my quote request?
- Provide the part number Optibelt ZR XL 118, the quantity you need, and any details about the drive or equipment. If you are replacing an existing belt, include the marking from the old belt.