V-belt Optibelt X22 x 2471
- Brand
- OPTIBELT
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- CX
- Series
- Super TX M=S
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
OPTIBELT X22 x 2471 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for X22 x 2471 and any equivalents.
This Optibelt Super TX M=S belt is a cogged classical V-belt with a CX profile and a length of 2471 mm. The cogged construction is common on drives with small pulleys, where a standard wrapped belt may not flex enough or may slip. Use the marking on the back of the old belt to confirm the part number before ordering.
Cogged classical V-belts are used on industrial drives such as fans, pumps, compressors and other machinery where the pulley diameters are small and the belt must bend sharply. The CX profile and 2471 mm length identify the belt, so check both against the old belt or the drive documentation. If the old belt is worn or the marking is unreadable, measure the outside length and compare it with 2471 mm.
To confirm fit, inspect the pulley grooves for wear and check that the belt sits correctly without bottoming out. A belt that is too long or too short will not tension properly, so verify the length before installation. If you need help matching the old belt or confirming the profile, send the part number and photos of the marking to our team by WhatsApp or email.
Dimensions
- Section
- CX
- Length
- 2471mm
Frequently asked questions
- How do I confirm that this belt fits my drive?
- Check the old belt for the profile and length marking. This belt is CX profile with a length of 2471 mm. Also inspect the pulley grooves for wear and confirm the belt sits at the correct height in the groove.
- What should I send to get a quote for this belt?
- Send the part number X22 x 2471, or the marking from the back of the old belt, by WhatsApp or email. If the marking is not clear, include photos and the drive details so we can help confirm the correct belt.
- Can I replace just one belt on a multi-belt drive?
- On drives that use multiple belts, it is common practice to replace all belts in the set at the same time. Mixed belts can have different lengths and may not share the load evenly, which can lead to premature failure.