V-belt Optibelt X22 x 2090

OPTIBELT X22 x 2090 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for X22 x 2090 and any equivalents.

This Optibelt Super TX M=S belt is a cogged classical V-belt in the CX profile with a length of 2090 mm. It is the belt to reach for when the drive calls for a CX cross-section and that specific length. The simplest way to order the right one is to match it against the belt you are replacing.

Start with the marking on the old belt. A CX profile and a 2090 mm length are the two values that have to line up, and both are normally printed on the back of the belt or stamped on the sleeve it came in. Read them off before the old belt is discarded, since a worn belt can be hard to identify once it is off the drive.

Check the drive as well. Sheave groove condition, pulley alignment and belt tension all affect how long a replacement lasts, and a cogged classical V-belt like this one is often chosen where the drive runs on smaller pulleys. If the old belt failed early, the sheaves are worth a look before the new belt goes on.

If the marking is unreadable, measure the outside length of the old belt and note the cross-section, then send both to our team. We can confirm whether this Optibelt X22 x 2090 in the CX profile is the correct match for your drive.