V-belt Optibelt X22 x 1785

OPTIBELT X22 x 1785 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for X22 x 1785 and any equivalents.

This is an Optibelt Super TX M=S cogged classical V-belt in CX profile, with a length of 1785 mm. Cogged classical V-belts of this type are commonly specified on drives where the belt must bend around smaller pulleys and run cooler than a solid belt. Confirm fit by matching the profile and the length to your existing belt.

The marking on the back of the belt is the fastest way to confirm what you are replacing. Read the profile and the length from the old belt and compare them with CX and 1785 mm. If the drive uses more than one belt, replace the full set at the same time so the belts share the load evenly.

Inspect the pulleys while the drive is open. Check for worn grooves, oil or debris, and correct alignment before the new belt goes on. A cogged classical V-belt runs on the same sheave profile as a solid classical belt of the same section, so the pulley groove is what tells you the section is right.

Send the part number, the profile and the length, and a photo of the marking on the old belt if you have one. We carry Optibelt and can help confirm the right belt or suggest an equivalent.