V-belt Optibelt X17 x 2740
- Brand
- OPTIBELT
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- BX
- Series
- Super TX M=S
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
OPTIBELT X17 x 2740 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for X17 x 2740 and any equivalents.
This is an Optibelt Super TX M=S cogged classical V-belt in the BX profile, with a listed length of 2740 mm. Cogged classical V-belts of this type are used on industrial drives where the sheave grooves are cut for a BX cross-section, including fans, pumps, compressors and similar machinery. Confirm the fit by matching the profile and the length to the drive before ordering.
The two values that identify this belt are the profile and the length. The profile is BX, and the length is 2740 mm as listed for part X17 x 2740. A BX belt will not seat correctly in a sheave cut for a different cross-section, so check the groove width and the sheave marking rather than relying on the old belt alone. The length should be read the same way it was originally specified, since a belt that is even slightly off will not tension properly.
The most reliable way to confirm the replacement is to read the marking on the back of the belt being replaced and compare it with X17 x 2740. If the marking is worn or unreadable, measure the belt and note the profile from the sheave. Send the part number, the profile and the length in your quote request, and the team can confirm the belt or suggest an equivalent.
Dimensions
- Section
- BX
- Length
- 2740mm
Frequently asked questions
- How do I confirm this belt fits my drive?
- Check the profile and the length against the drive. This belt is BX profile with a listed length of 2740 mm, part X17 x 2740. Compare those two values with the marking on the belt you are removing and with the sheave groove.
- What should I send to get a quote?
- Send the part number X17 x 2740, along with the profile and the length if you have them. A photo of the marking on the back of the old belt also helps confirm the correct replacement.
- What if the marking on my old belt is unreadable?
- Measure the belt and note the cross-section from the sheave groove, then send those details with your request. The team can help confirm the right belt or suggest an equivalent based on the profile and length.