V-belt Optibelt X17 x 2340
- Brand
- OPTIBELT
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- BX
- Series
- Super TX M=S
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
OPTIBELT X17 x 2340 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for X17 x 2340 and any equivalents.
Replace a worn cogged classical V-belt with confidence. The Optibelt X17 x 2340 Super TX M=S is a BX-profile belt with a 2340 mm length. Use the old belt's markings and dimensions to confirm this is the correct replacement.
To match this belt, remove the old one and look for the part number on the back. You should find X17 x 2340, BX, or both. The profile is BX and the length is 2340 mm. If the old belt is too worn to read, measure its top width and outside length with a belt gauge or tape. Compare those measurements to the BX profile and 2340 mm length.
A cogged classical V-belt like this one is used in industrial drives where a standard wrapped belt may not fit or run as cool. The cogs on the underside help the belt bend around smaller pulleys. Before installing, inspect the pulleys for wear, alignment, and debris. Check that the belt sits correctly in the groove without bottoming out. If you are replacing multiple belts on the same drive, replace them as a set to keep tension even.
Dimensions
- Section
- BX
- Length
- 2340mm
Frequently asked questions
- How do I confirm this is the right belt for my drive?
- Read the marking on the back of the old belt. It should show X17 x 2340 or BX. If it is unreadable, measure the top width and outside length and compare to the BX profile and 2340 mm length.
- What should I send to get a quote?
- Send the part number X17 x 2340, the profile BX, and the length 2340 mm. If you have a photo of the old belt's marking, include that as well. We will confirm the belt and reply by WhatsApp or email.
- Can I use this belt on any BX-profile drive?
- This belt has a BX profile and a 2340 mm length. It will fit drives designed for that profile and length. Always check pulley condition and alignment before installation.