V-belt Optibelt X17 3500 XEP
- Brand
- OPTIBELT
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- BX
- Series
- Super XE-Power Pro M=S
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
OPTIBELT X17 3500 XEP belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for X17 3500 XEP and any equivalents.
The Optibelt X17 3500 XEP is a cogged classical V-belt in the BX profile with a 3500 mm length, part of the Super XE-Power Pro M=S series. We carry it for maintenance and replacement work on drives that specify this profile and length. To match the belt you are replacing, start with the marking on the old belt.
Read the back of the belt being replaced and compare the profile and length to this listing. The X17 3500 XEP is a BX profile belt measuring 3500 mm, so a drive that calls for BX and 3500 mm is the direct match. If the old belt is worn or the marking is unreadable, measure the length and confirm the cross-section before ordering.
Cogged classical V-belts like this one are used on industrial drives where a BX profile is specified. When you request a quote, send the part number X17 3500 XEP along with the drive or equipment details so we can confirm it is the right belt for the application. If you are replacing more than one belt on the same drive, include the quantity and the position of each belt.
For drives that run multiple belts, replace the full set at the same time so the belts share the load evenly. Inspect the pulleys for wear, alignment and debris before installation, and check that the new belt sits correctly in the groove. A belt that is the wrong profile or length will not seat properly and will wear quickly.
Dimensions
- Section
- BX
- Length
- 3500mm
Frequently asked questions
- How do I confirm the X17 3500 XEP matches the belt I am replacing?
- Compare the profile and length on the old belt to the BX profile and 3500 mm length of the X17 3500 XEP. If the marking is still legible, the part number on the back is the most direct reference. If it is not, measure the outside length and check the cross-section before ordering.
- What information should I send with my quote request?
- Send the part number X17 3500 XEP, the quantity you need, and any details about the drive or equipment. If you are replacing a set, include the number of belts and their positions. This helps us confirm the correct belt for your application.
- Can I replace just one belt on a multi-belt drive?
- On a drive that uses more than one belt, replacing the full set at the same time is recommended so the belts work together evenly. Mixing a new belt with worn belts can cause uneven loading and shorter service life.