V-belt Optibelt X17 2306 XEP
- Brand
- OPTIBELT
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- BX
- Series
- Super XE-Power Pro M=S
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
OPTIBELT X17 2306 XEP belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for X17 2306 XEP and any equivalents.
The Optibelt X17 2306 XEP is a cogged classical V-belt in the BX profile with a length of 2306 mm. It belongs to the Super XE-Power Pro M=S series. This page helps you match it to the belt you are replacing.
To confirm a match, read the marking on the back of the old belt. You are looking for the same profile and length: BX and 2306 mm. The part number X17 2306 XEP may also appear. If the marking is worn, measure the outside length and compare it to 2306 mm, and check that the cross-section matches the BX profile.
A cogged classical V-belt like this one is used on drives where a standard wrapped belt may not provide enough flexibility or where heat buildup is a concern. The cogs improve bending and airflow around small pulleys. Before ordering, inspect the pulleys for wear, alignment and correct groove profile. Replace belts in sets when multiple belts run together.
When you request a quote, send the full part number X17 2306 XEP and the quantity. If you are unsure, send a photo of the old belt marking and the pulley dimensions. The team can help confirm the right belt or suggest an equivalent.
Dimensions
- Section
- BX
- Length
- 2306mm
Frequently asked questions
- How do I know if the Optibelt X17 2306 XEP is the right belt for my drive?
- Check the old belt marking for the profile BX and length 2306 mm. The part number X17 2306 XEP should also match. If the marking is unreadable, measure the outside length and compare it to 2306 mm, and verify the cross-section is BX.
- Can I replace just one belt in a multi-belt drive?
- It is best to replace all belts in a set at the same time. Mixing new and worn belts can cause uneven tension and premature failure. Order the quantity you need for the full set.
- What information should I send with my quote request?
- Send the part number X17 2306 XEP, the quantity, and any details from the old belt marking. If you have a photo of the belt or the drive, include it. The team will confirm the belt or help you find an equivalent.