V-belt Optibelt X13 x 871
- Brand
- OPTIBELT
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- AX
- Series
- Super TX M=S
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
OPTIBELT X13 x 871 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for X13 x 871 and any equivalents.
This Optibelt X13 x 871 belt is a cogged classical V-belt in the Super TX M=S series. It has an AX profile and a length of 871 mm. Use this page to match it to the belt you are replacing.
To confirm the match, read the marking on the back of the old belt. You are looking for the same part number, X13 x 871, or the same profile and length: AX and 871 mm. If the old belt is worn or the marking is unreadable, measure the outside length and compare it to 871 mm, and check that the cross-section matches the AX profile.
The X13 x 871 is a cogged classical V-belt, which means it has a raw-edge cogged construction. This type is used on drives where a classical V-belt is specified. When you replace it, inspect the pulleys for wear, alignment, and debris, and check the belt for cracking, glazing, or missing cogs.
If you are unsure whether this is the correct belt, send a photo of the old belt and the drive. Include the part number if it is visible. The team can help confirm the right belt or suggest an equivalent based on the profile and length.
Dimensions
- Section
- AX
- Length
- 871mm
Frequently asked questions
- How do I match the Optibelt X13 x 871 to my old belt?
- Check the marking on the back of the old belt. If it reads X13 x 871, it is the same belt. If not, confirm the profile is AX and the length is 871 mm. You can also measure the outside length of the old belt and compare it to 871 mm.
- What should I send to get a quote for this belt?
- Send the part number X13 x 871, or the profile AX and length 871 mm, by WhatsApp or email. If you have a photo of the old belt or the drive, include it to help confirm the match.
- Can you help if I cannot read the part number on the old belt?
- Yes. Send a photo of the old belt and the drive, and any measurements you can take. The team can help identify the correct belt by profile and length.