V-belt Optibelt X13 x 797
- Brand
- OPTIBELT
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- AX
- Series
- Super TX M=S
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
OPTIBELT X13 x 797 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for X13 x 797 and any equivalents.
The Optibelt X13 x 797 is a cogged classical V-belt from the Super TX M=S series. It has an AX profile and a length of 797 mm. This page is for maintenance and purchasing staff who need to match a belt that is already on the drive.
The most reliable way to match this belt is to read the marking on the back of the belt being replaced. Look for the profile and the length, and compare them with the AX profile and 797 mm length of this Optibelt belt. If the old belt is worn or the marking is gone, measure the length along the belt and check the profile against the pulley groove.
A cogged classical V-belt like this one is used where a standard wrapped belt may not fit or run as cool. The cogged construction is molded into the belt, and the AX profile sits in the same groove as a classical A-section belt. Confirm that the drive uses an A-section pulley and that the belt length suits the center distance before ordering.
If you are unsure whether this is the correct replacement, send the belt marking or a photo of the old belt to our team. We can help confirm the profile and length, or suggest an equivalent if this exact belt is not the right match.
Dimensions
- Section
- AX
- Length
- 797mm
Frequently asked questions
- How do I confirm this is the right belt for my drive?
- Check the marking on the back of the old belt. It should show an AX profile and a length close to 797 mm. If the marking is unreadable, measure the outside length and check the pulley groove profile.
- What does the AX profile mean for fit?
- AX is a classical V-belt profile with a cogged construction. It fits the same pulley grooves as a standard A-section belt, but the cogged design allows it to run cooler and flex more easily.
- Can you help if I cannot find the marking on the old belt?
- Yes. Send us the part number if you have it, or a photo of the old belt and the drive pulleys. We will help confirm the profile and length or suggest an equivalent.