V-belt Optibelt X13 x 660
- Brand
- OPTIBELT
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- AX
- Series
- Super TX M=S
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
OPTIBELT X13 x 660 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for X13 x 660 and any equivalents.
The Optibelt X13 x 660 Super TX M=S is a cogged classical V-belt with an AX profile and a 660 mm length. It is the belt to specify when you are replacing a failed belt and need the same profile and length.
To match it to the belt being replaced, read the marking on the back of the old belt. The X13 x 660 code identifies the profile and length, and the AX profile confirms the cross-section. If the old belt is worn or the marking is unreadable, measure the top width and the outside length, then compare those dimensions with the 660 mm length listed here.
The cogged construction is suited to drives with small pulleys, where a classical V-belt may not flex enough. When you replace a belt, inspect the pulleys for wear, alignment and debris, and check the tension after installation. If the drive uses multiple belts, replace them as a set so the load is shared evenly.
Dimensions
- Section
- AX
- Length
- 660mm
Frequently asked questions
- How do I confirm this Optibelt X13 x 660 is the correct replacement?
- Check the marking on the belt you are replacing. It should show the same profile and length. If the marking is gone, measure the top width and outside length and compare with the AX profile and 660 mm length of this belt.
- Can I replace just one belt on a multi-belt drive?
- It is best to replace all belts in the set at the same time. A new belt mixed with used belts can sit at a different tension and may not carry its share of the load.
- What should I send to get a quote for this belt?
- Send the part number X13 x 660, the brand Optibelt, and the quantity you need by WhatsApp or email. If you are unsure, include a photo of the old belt marking and the pulley dimensions.