V-belt Optibelt X13 x 3380
- Brand
- OPTIBELT
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- AX
- Series
- Super TX M=S
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
OPTIBELT X13 x 3380 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for X13 x 3380 and any equivalents.
This page covers the Optibelt X13 x 3380 Super TX M=S, a cogged classical V-belt in AX profile with a length of 3380 mm. Use the marking on the old belt to match it before you request a quote.
To match the belt being replaced, read the marking on its back. The part number X13 x 3380 identifies the belt: X13 corresponds to the AX profile, and 3380 is the length in millimeters. If the old belt is worn or the marking is unreadable, measure the outside length and note the top width and thickness so the profile can be confirmed.
This Optibelt belt is a cogged classical V-belt in the Super TX M=S series. The cogged construction is typical for drives where the belt must flex around smaller pulleys. Make sure the replacement matches both the profile and the length exactly; a belt of the same length but a different profile will not seat correctly in the pulley grooves.
When you contact MR Industrial Accessories, send the full part number X13 x 3380, the profile AX, and the length 3380 mm. If you have the old belt, include a photo of the back marking. The team can confirm the belt or suggest an equivalent based on the data you provide.
Dimensions
- Section
- AX
- Length
- 3380mm
Frequently asked questions
- How do I confirm this is the right belt for my drive?
- Check the marking on the belt you are replacing. It should show X13 x 3380. The X13 indicates the AX profile, and 3380 is the length in millimeters. If the marking is gone, measure the outside length and the cross-section.
- What details should I send with my quote request?
- Send the part number X13 x 3380, the profile AX, and the length 3380 mm. If you have the old belt, a clear photo of the back marking helps confirm the match.
- Is this a cogged belt?
- Yes, the Optibelt X13 x 3380 Super TX M=S is a cogged classical V-belt. The cogged design is common on drives with smaller pulleys.