V-belt Optibelt X13 x 2230
- Brand
- OPTIBELT
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- AX
- Series
- Super TX M=S
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
OPTIBELT X13 x 2230 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for X13 x 2230 and any equivalents.
When you read the marking on an old belt, the part number tells you exactly what to replace it with. This Optibelt Super TX M=S belt is marked X13 x 2230, with profile AX and a length of 2230 mm. Use those same figures to match your drive.
The marking on the back of a worn belt is the most reliable reference you have. If it reads X13 x 2230, this Optibelt Super TX M=S cogged classical V-belt is the direct match. The profile is AX and the length is 2230 mm. Confirm both numbers before you order, since a belt with the correct profile but a different length will not fit the drive.
Cogged classical V-belts are used on industrial drives where a standard cross-section is required. The cogged construction is typical of this belt type. When you replace a belt, inspect the sheaves for wear and check the tension according to your maintenance practice. If you are unsure whether the marking is still legible, send us what you can read and the drive details.
Dimensions
- Section
- AX
- Length
- 2230mm
Frequently asked questions
- What part number should I look for on the old belt?
- Look for X13 x 2230. That is the marking for this Optibelt Super TX M=S belt. The profile is AX and the length is 2230 mm.
- Can I quote the belt by the marking alone?
- Yes. Send us X13 x 2230 by WhatsApp or email and we will confirm the belt. If the marking is worn, send the profile and length you can read.
- What does the profile and length mean for fit?
- The profile AX must match the sheave groove, and the length 2230 mm must match the drive center distance. Both are shown in the marking X13 x 2230.