V-belt Optibelt X13 x 1830
- Brand
- OPTIBELT
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- AX
- Series
- Super TX M=S
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
OPTIBELT X13 x 1830 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for X13 x 1830 and any equivalents.
The Optibelt Super TX M=S is a cogged classical V-belt in profile AX with a length of 1830 mm. We carry it for maintenance and purchasing teams who need the drive back in service without guesswork. Before you fit the new belt, take a few minutes to check the drive.
Inspect the sheaves first. Worn, grooved or polished groove flanks will wear a new belt quickly, so look at the groove surfaces and check for damage, runout or a sheave that has worked loose on its shaft. Confirm the sheave grooves match the AX profile and that the belt sits correctly in them.
Check alignment and tension next. Misaligned sheaves and incorrect tension are common causes of short belt life, noise and heat. Turn the drive over by hand where it is safe to do so and look for interference, seized idlers or bearings that no longer run smoothly. Correct any of these before the new belt goes on.
The marking on the back of the belt reads X13 x 1830, which identifies the profile and the 1830 mm length. Send us that marking, or the part number X13 x 1830, by WhatsApp or email and we will confirm the belt for your drive.
Dimensions
- Section
- AX
- Length
- 1830mm
Frequently asked questions
- What should I check before fitting this belt?
- Check the sheave grooves for wear, confirm the sheaves are aligned, and inspect idlers and bearings. Set tension correctly after the belt is fitted.
- How do I identify the belt I am replacing?
- Read the marking on the back of the belt. This belt is marked X13 x 1830, an AX profile with a length of 1830 mm.
- How do I request a quote?
- Send the part number X13 x 1830 by WhatsApp or email. If you are unsure of the exact belt, send the marking from the old belt and we will help confirm the right one.