V-belt Optibelt X13 x 1655
- Brand
- OPTIBELT
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- AX
- Series
- Super TX M=S
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
OPTIBELT X13 x 1655 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for X13 x 1655 and any equivalents.
This Optibelt Super TX M=S belt is a cogged classical V-belt with an AX profile and a length of 1655 mm. When you need to replace a worn belt, the most reliable approach is to match the marking on the old belt exactly. The part number X13 x 1655 identifies both the profile and the length.
Before ordering, remove the old belt and read its back. Look for the profile (AX) and the length (1655 mm), and compare them with the X13 x 1655 marking. If the old belt is too worn to read, measure its length and check the pulley groove width to confirm the profile. A belt with the same profile and length will fit the same drive.
Cogged classical V-belts like this one are used in industrial drives where a standard classical profile is required. The cogged construction helps the belt run cooler and more flexibly on smaller pulleys, but always confirm that the drive is designed for an AX profile. Do not substitute a different profile or length without checking pulley compatibility.
When you request a quote, send the complete part number X13 x 1655 along with the quantity you need. If you are replacing multiple belts on the same drive, note that they should be from the same production run to ensure even tension. Our team can confirm the correct belt or suggest an equivalent based on the data you provide.
Dimensions
- Section
- AX
- Length
- 1655mm
Frequently asked questions
- How do I confirm this is the right belt for my drive?
- Check the marking on your old belt. It should show the profile AX and the length 1655 mm, matching the X13 x 1655 part number. If the old belt is unreadable, measure its length and verify the pulley groove profile.
- What does the X13 x 1655 code mean?
- The code identifies the belt's profile and length. X13 corresponds to the AX profile, and 1655 is the length in millimeters. Always quote the full code when requesting a quote.
- Can I use this belt on a drive that originally had a different profile?
- No. The profile must match the pulley grooves. Using a different profile can cause premature wear or slipping. If you are unsure, send us the old belt's marking and we can help confirm the correct replacement.