V-belt Optibelt X13 x 1452
- Brand
- OPTIBELT
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- AX
- Series
- Super TX M=S
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
OPTIBELT X13 x 1452 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for X13 x 1452 and any equivalents.
When you need to replace a cogged classical V-belt, the marking on the old belt is your best starting point. This page covers the Optibelt X13 x 1452 from the Super TX M=S series, a belt with an AX profile and a length of 1452 mm. Use the marking to confirm the part number before you request a quote.
The Optibelt X13 x 1452 is a cogged classical V-belt in the Super TX M=S series. Its profile is AX and its length is 1452 mm. The cogged construction is typical of this belt type, and the marking on the back of the belt should show the part number and size. If the old belt is worn or dirty, clean the marking carefully so you can read it accurately.
To match this belt, check that the profile and length on your old belt match AX and 1452 mm. The part number X13 x 1452 identifies the belt, and the Super TX M=S series indicates the construction. If the marking is unreadable, measure the top width and the outside length to confirm the profile and length before ordering.
When you request a quote, send the full part number X13 x 1452 and the profile AX. If you have the old belt, include a photo of the marking. Our team can confirm the right belt or suggest an equivalent based on the information you provide.
Dimensions
- Section
- AX
- Length
- 1452mm
Frequently asked questions
- How do I read the marking on the old belt?
- Look for the part number and size printed on the back of the belt. For this belt, you should see X13 x 1452, and the profile AX may also be marked. Clean the belt if needed to read it clearly.
- What information do I need to request a quote?
- Send the part number X13 x 1452 and the profile AX. If you have the old belt, a photo of the marking helps us confirm the correct belt.
- Can you help if the marking is worn off?
- Yes. Measure the top width and the outside length of the old belt and send those measurements along with any other details. We can then help identify the correct replacement.