V-belt Optibelt X13 922 XEP
- Brand
- OPTIBELT
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- AX
- Series
- Super XE-Power Pro M=S
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
OPTIBELT X13 922 XEP belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for X13 922 XEP and any equivalents.
This Optibelt X13 922 XEP is a cogged classical V-belt in the AX profile with a length of 922 mm. The AX profile and 922 mm length are the two figures to match when selecting a replacement. We carry this belt and quote by part number.
The profile defines the cross-section that must sit correctly in the pulley groove, and the length sets the fit around the drive. On the belt, the marking shows the part number, so the X13 922 XEP can be checked against the old belt before ordering. Confirm the profile is AX and the length is 922 mm.
The cogged construction is typical of classical V-belts where the raw edge and molded teeth help the belt run on smaller pulleys. For a maintenance or engineering replacement, verify the drive uses an AX profile and that the measured length is 922 mm. If the existing belt is worn or the drive has been modified, send the part number and any photos of the marking.
When requesting a quote, include the part number X13 922 XEP and the quantity needed. If you are replacing a set, list all belts on the drive so we can match the same profile and length. The team can help confirm the right belt or suggest an equivalent based on the details you provide.
Dimensions
- Section
- AX
- Length
- 922mm
Frequently asked questions
- What do the profile and length mean on the Optibelt X13 922 XEP?
- The profile is AX, which is the cross-section that fits the pulley groove. The length is 922 mm, which is the datum length around the drive. Both must match the old belt for correct fit.
- How do I confirm this is the right belt for my drive?
- Check the marking on the back of the old belt. If it reads X13 922 XEP and the profile is AX with a length of 922 mm, this is the same part. If the marking is different, send us the part number and we can help confirm the right belt.
- What information should I send with a quote request?
- Send the part number X13 922 XEP, the quantity, and if possible a photo of the old belt marking. For drives with multiple belts, list all part numbers so we can match the set.