V-belt Optibelt X13 820 XEP
- Brand
- OPTIBELT
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- AX
- Series
- Super XE-Power Pro M=S
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
OPTIBELT X13 820 XEP belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for X13 820 XEP and any equivalents.
Matching the Optibelt X13 820 XEP to the belt you are replacing starts with the marking on the old belt. This is a cogged classical V-belt in the AX profile with a length of 820 mm. Confirm those two details and you have the correct replacement.
Check the back of the belt you are removing: it should show an AX profile and 820 mm. If the old belt is worn or the marking is unreadable, measure the outside length and compare it to 820 mm. The X13 820 XEP is built to those dimensions, so it seats correctly in the pulley groove.
Cogged classical V-belts like this one are used on industrial drives where a standard profile is required. The cogged construction helps the belt flex around smaller pulleys, but the critical fit remains the AX profile and 820 mm length. Do not substitute a different profile or length without checking the drive.
When you request a quote, send the part number X13 820 XEP or the full marking from the old belt. If you have several drives, include the quantity and any other belt markings so we can confirm the match. We carry Optibelt and can help you verify the right belt before you order.
Dimensions
- Section
- AX
- Length
- 820mm
Frequently asked questions
- How do I confirm the X13 820 XEP is the right belt for my drive?
- Look at the marking on the belt you are replacing. It should read AX and 820 mm. If it does, the X13 820 XEP is the correct match. If the marking is gone, measure the outside length and compare it to 820 mm.
- What does the AX profile mean for fit?
- AX is the profile of this cogged classical V-belt. It determines how the belt sits in the pulley groove. The 820 mm length is the other critical dimension. Both must match your drive.
- Can I use this belt if my old belt has a different part number?
- Yes, if the old belt is also an AX profile and 820 mm long. The part number may vary between suppliers, but the profile and length are what matter for fit. Send us the marking from your old belt and we can help confirm.