V-belt Optibelt X13 3005 XEP
- Brand
- OPTIBELT
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- AX
- Series
- Super XE-Power Pro M=S
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
OPTIBELT X13 3005 XEP belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for X13 3005 XEP and any equivalents.
The Optibelt X13 3005 XEP is a cogged classical V-belt in the AX profile with a length of 3005 mm. When you need to match an existing drive, the marking on the back of the old belt is the first thing to read. This page covers what that marking tells you and how to use it to specify the correct replacement.
The marking on a belt typically shows the profile and the length. For this Optibelt belt, the profile is AX and the length is 3005 mm. If the old belt is worn or dirty, clean the back with a cloth and read the characters carefully. The code X13 3005 XEP identifies this specific belt in the Optibelt Super XE-Power Pro M=S series.
Once you have the profile and length from the old belt, compare them with the data here. The profile must match, and the length must match the drive's requirement. The X13 3005 XEP is a cogged classical V-belt, which runs in standard classical V-belt pulleys. Cogged construction is common on drives with small pulleys or where flexibility is needed.
If the marking is unreadable, measure the outside length of the old belt and note the cross-section. For a quote, send the part number X13 3005 XEP or the profile and length. Our team can confirm the belt or suggest an equivalent from the brands we carry.
Dimensions
- Section
- AX
- Length
- 3005mm
Frequently asked questions
- How do I read the marking on my old belt?
- Look for a code on the back of the belt. It usually includes the profile and length. For example, this belt is marked X13 3005 XEP, which indicates an AX profile and a 3005 mm length. If the marking is worn, clean it and use a light to read it.
- What if I cannot find the part number on the old belt?
- Measure the outside length and identify the cross-section. Then send those details or the dimensions to our team. We can help match the belt to the Optibelt X13 3005 XEP or another belt with the same profile and length.
- Can I replace just one belt in a multi-belt drive?
- For drives with multiple belts, it is common practice to replace all belts at the same time. Mixing new and worn belts can cause uneven tension. If you need multiple belts, include the quantity in your quote request.