V-belt Optibelt X13 1786 XEP
- Brand
- OPTIBELT
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- AX
- Series
- Super XE-Power Pro M=S
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
OPTIBELT X13 1786 XEP belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for X13 1786 XEP and any equivalents.
The Optibelt X13 1786 XEP is a cogged classical V-belt from the Super XE-Power Pro M=S series. It has an AX profile and a length of 1786 mm. To match it, start with the marking on the belt you are replacing.
Read the back of the old belt. You are looking for the profile and the length. This belt is marked with the profile AX and a length of 1786 mm. If the old marking matches, this is the correct size. If the old belt is worn or the marking is gone, measure the outside length and compare it to 1786 mm.
When you have the marking, send it to us by WhatsApp or email. We carry the Optibelt X13 1786 XEP and can confirm it against your equipment. If you need help reading a faded marking or checking the profile, include a photo of the old belt and the drive. We reply promptly with the next step.
For drives that use more than one belt, replace all belts in the set at the same time. Mixing a new belt with old ones can cause uneven tension and vibration. Inspect the pulleys for wear or debris before installing the new belt. After installation, check tension according to your equipment manual.
Dimensions
- Section
- AX
- Length
- 1786mm
Frequently asked questions
- How do I confirm this is the right belt for my drive?
- Check the marking on the back of the belt you are replacing. You need the profile AX and the length 1786 mm. If both match, this belt is the correct size.
- What if the marking on my old belt is unreadable?
- Measure the outside length and compare it to 1786 mm. Also check the pulley groove width to confirm the AX profile. Send us a photo and the equipment details by WhatsApp or email, and we will help you verify.
- Should I replace all belts on a multi-belt drive at once?
- Yes. Replace the full set so all belts have the same length and wear. Using a new belt with old ones can lead to uneven tension and vibration.