V-belt Optibelt X13 1608 XEP
- Brand
- OPTIBELT
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- AX
- Series
- Super XE-Power Pro M=S
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
OPTIBELT X13 1608 XEP belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for X13 1608 XEP and any equivalents.
The Optibelt X13 1608 XEP is a cogged classical V-belt in the AX profile with a length of 1608 mm. It belongs to the Super XE-Power Pro M=S series and is built for drives that use a classical V-belt cross-section. This page covers how to match it to the belt you are replacing and what to send for a quote.
To match the belt being replaced, read the marking on the back of the old belt. Confirm the profile is AX and the length is 1608 mm, then check that the part number X13 1608 XEP matches. If the marking is worn or unreadable, measure the outside length and compare it to 1608 mm, and verify the cross-section against the AX profile. A belt with the same profile and length will seat correctly in the pulley grooves.
Cogged classical V-belts like this one are used where a standard classical V-belt is specified. The cogged construction is typical for drives that need flexibility around smaller pulleys. When replacing, inspect the pulleys for wear, alignment and debris, and check that the belt sits at the correct height in the groove. If you are replacing more than one belt on a multi-belt drive, replace them as a set so the load is shared evenly.
Dimensions
- Section
- AX
- Length
- 1608mm
Frequently asked questions
- How do I confirm the Optibelt X13 1608 XEP is the right belt?
- Check the marking on the back of the belt you are replacing. The profile should be AX and the length 1608 mm. If the part number X13 1608 XEP matches, it is the same belt. If the marking is not clear, measure the outside length and compare it to 1608 mm.
- What should I send to request a quote for this belt?
- Send the part number X13 1608 XEP, the profile AX and the length 1608 mm by WhatsApp or email. If you have the old belt, include a photo of the back marking. The team can confirm the belt or suggest an equivalent.
- Can MR help if I am not sure about the profile or length?
- Yes. Send the details you have, including any numbers from the old belt and the drive it is used on. The team will help confirm the correct belt or an equivalent.