V-belt Optibelt X10 x 597
- Brand
- OPTIBELT
- Category
- Power transmission
- Subcategory
- V-belts
- Series
- Super TX M=S
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
OPTIBELT X10 x 597 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for X10 x 597 and any equivalents.
The Optibelt X10 x 597 is a cogged classical V-belt in the Super TX M=S series, built to the ZX profile with a 597 mm length. It is the belt to reach for when you are matching the one coming off the drive. The cleanest way to confirm the match is to read the marking on the back of the old belt and compare it against the code on this page.
Start with the profile and the length, because those two values decide whether the belt sits correctly in the pulley groove and runs at the right tension. This belt is a ZX profile, a cogged classical V-belt, with a length of 597 mm. If the belt you are replacing carries the same profile and the same length, you have your match.
Cogged construction is common on compact drives where the belt has to bend around small pulleys, so check the old belt for a raw-edge, notched underside before you order. On multi-belt drives, replace the full set at once so the belts share the load evenly rather than letting the newest one carry more than its share.
If the back of the old belt is worn or the marking has rubbed off, send us the part number you have, the profile and length you measured, and a photo of the drive and the pulley grooves. We carry Optibelt and can confirm the right belt or suggest an equivalent.
Dimensions
- Section
- ZX
- Length
- 597mm
Frequently asked questions
- How do I confirm this is the belt I am replacing?
- Read the marking on the back of the old belt. If it shows a ZX profile and a 597 mm length, the Optibelt X10 x 597 Super TX M=S is the match. If the marking is gone, send us the drive details and a photo of the belt and pulleys.
- What should I send for a quote?
- Send the part number X10 x 597, or the profile and length from the old belt, along with the quantity you need. If you are unsure of the profile, a photo of the belt cross-section and the pulley groove helps us confirm it.
- Should I replace more than one belt at a time?
- On a drive that runs several belts side by side, replace the whole set together. Mixing a new belt with worn ones changes how the load is shared across the grooves.