V-belt Optibelt X10 x 1522
- Brand
- OPTIBELT
- Category
- Power transmission
- Subcategory
- V-belts
- Series
- Super TX M=S
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
OPTIBELT X10 x 1522 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for X10 x 1522 and any equivalents.
When a drive belt needs replacing, the marking on the back of the old belt is your most reliable reference. This page covers the Optibelt X10 x 1522 from the Super TX M=S series, a cogged classical V-belt in ZX profile with a length of 1522 mm. Use the numbers printed on the belt to confirm you are specifying the correct part before requesting a quote.
The Optibelt X10 x 1522 is a cogged classical V-belt in the Super TX M=S series. Its profile is ZX and its length is 1522 mm. The cogged construction is typical of this belt type, and the profile and length are the key figures to match when reading the old belt's marking. If the marking is worn or unreadable, measure the length along the belt and note the profile from the drive's pulley groove.
To request a quote, send us the part number X10 x 1522, or the full marking from the old belt. If you have the profile and length but not the brand, we can cross-check the size against our range. For drives using multiple belts, it is good practice to replace the full set at once and to inspect the pulleys for wear, alignment and correct tension before fitting new belts.
Dimensions
- Section
- ZX
- Length
- 1522mm
Frequently asked questions
- How do I confirm the Optibelt X10 x 1522 is the right belt for my drive?
- Read the marking on the back of the old belt. If it shows X10 x 1522, or the profile ZX and length 1522 mm, this is the correct size. Send us the marking or the part number and we will help confirm it.
- What should I send to get a quote for this belt?
- Send the part number X10 x 1522, or the complete marking from the old belt, including the profile and length. A photo of the marking is helpful if the text is difficult to read.
- Can I replace just one belt on a multi-belt drive?
- For drives that use more than one belt, it is common practice to replace all belts in the set at the same time. Mixing new and worn belts can affect load sharing and belt life. Inspect the pulleys for wear and alignment as part of the job.