Timing belt Optibelt T5 720
- Brand
- OPTIBELT
- Category
- Power transmission
- Subcategory
- Timing belts
- Series
- Alpha Power
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
OPTIBELT T5 720 belongs to timing belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for T5 720 and any equivalents.
The Optibelt Alpha Power T5 720 is a timing belt with a T5 profile and a 720 mm length. The 5 mm pitch matches the tooth spacing of the belt it replaces. If you are working from the belt already on the drive, the marking on its back is the fastest way to confirm this is the one you need.
Pull the old belt and read the back of it. A T5 720 marking means a T5 profile at 720 mm, which is what this belt is. Watch for a different length in the same profile, since the tooth spacing looks identical and only the number changes. If the marking is worn off, measure the outside length and count the teeth so we can confirm the match.
A timing belt that has run its life should be replaced before it fails. Inspect the pulleys for worn teeth, check the tensioner, and look for oil or debris in the drive. If the belt drives more than one pulley, replace it as part of the same service.
Send the part number, the belt marking, or a photo of the old belt by WhatsApp or email. We carry the Optibelt Alpha Power line and can confirm the T5 720 or point you to the right belt for your drive.
Dimensions
- Profile
- T5
- Pitch
- 5mm
- Length
- 720mm
Frequently asked questions
- How do I confirm the T5 720 is the right belt?
- Read the marking on the back of the belt you are replacing. A T5 720 marking matches this belt: T5 profile, 720 mm length, 5 mm pitch. If the marking is gone, send us the outside length and tooth count.
- What does the 5 mm pitch mean on this belt?
- The pitch is the distance from one tooth center to the next. The T5 720 uses a 5 mm pitch, so the pulley must have matching T5 grooves to run the belt correctly.
- What should I send to get a quote?
- Send the part number T5 720, the marking from the old belt, or a photo of the belt and the drive. We reply by WhatsApp or email with the quote or the equivalent we carry.