Timing belt Optibelt T10 800
- Brand
- OPTIBELT
- Category
- Power transmission
- Subcategory
- Timing belts
- Series
- Alpha Power
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
OPTIBELT T10 800 belongs to timing belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for T10 800 and any equivalents.
The Optibelt Alpha Power T10 800 is a timing belt with a T10 profile and an 800 mm length. Its 10 mm pitch defines the spacing of the teeth along the belt, so the profile and the length are the two figures to confirm against your drive before you order.
Profile and length work together when you identify a synchronous belt. The T10 profile sets the tooth shape and the 10 mm pitch sets the distance from one tooth to the next; the 800 mm length is the belt's own dimension, not a center distance. A belt marked T10 800 matches a drive cut for that profile and that length.
The cleanest way to verify a replacement is to read the marking on the back of the old belt and compare it with the profile, pitch and length above. If the marking is worn or the belt has already been removed, measure the length and count the teeth to confirm the T10 profile before you commit.
Send the part number T10 800 by WhatsApp or email and our team will confirm the belt and reply with a quote. If you are replacing more than one belt on the same drive, include every part number in the request so the set can be quoted together.
Dimensions
- Profile
- T10
- Pitch
- 10mm
- Length
- 800mm
Frequently asked questions
- What do the T10 and 800 mean on this belt?
- T10 is the profile and 800 is the length in millimeters. The pitch is 10 mm, which is the distance between adjacent teeth. These three figures are what you match to the drive.
- How do I confirm this is the right belt for my drive?
- Read the marking on the back of the belt you are replacing and compare the profile, pitch and length with the T10 800 data above. If the marking is not readable, measure the length and check the tooth spacing.
- What should I send to get a quote?
- Send the part number T10 800, the quantity, and the part numbers of any other belts on the same drive. Our team will confirm the belt and reply with a quote.