Timing belt Optibelt T10 400
- Brand
- OPTIBELT
- Category
- Power transmission
- Subcategory
- Timing belts
- Series
- Alpha Power
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
OPTIBELT T10 400 belongs to timing belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for T10 400 and any equivalents.
This Optibelt Alpha Power timing belt carries the profile T10 and a 400 mm length. The pitch is 10 mm, so the profile and the length together define the fit on the drive. Use those two figures to check the belt against the pulley groove and the center distance before you request a quote.
The T10 profile is a synchronous belt profile, and the 10 mm pitch is the distance between tooth centers. The length is 400 mm. When you read the marking on the back of an old belt, match the profile and the length first; those are the two values that decide whether the belt will run correctly on the pulleys.
For a quote on this Optibelt T10 400 Alpha Power belt, send the part number as it appears here. If the belt on the drive is marked differently, send a photo of the back marking and the pulley teeth so we can confirm the profile and the length you need.
Dimensions
- Profile
- T10
- Pitch
- 10mm
- Length
- 400mm
Frequently asked questions
- What do the profile and length tell me about this belt?
- The profile is T10 and the pitch is 10 mm, which describes the tooth spacing. The length is 400 mm. Together they define the belt's fit on the drive.
- How do I confirm this is the belt I need?
- Check the marking on the back of the belt you are replacing. The profile and the length are the two values to compare against the T10 profile and 400 mm length of this belt.
- What should I send to request a quote?
- Send the part number Optibelt T10 400, or a photo of the back marking on the old belt. If the marking is unclear, include the pulley teeth so we can help confirm the profile and length.