Timing belt Optibelt T10 1960

OPTIBELT T10 1960 belongs to timing belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for T10 1960 and any equivalents.

This Optibelt Alpha Power timing belt is identified by the code T10 1960. It has a T10 profile, a 1960 mm length, and a 10 mm pitch. The T10 profile is common in industrial drives where synchronous power transmission is needed, such as on conveyors, packaging equipment, and other machinery that requires precise timing. To confirm this belt fits your drive, check that the old belt's marking shows T10 and 1960 mm, and that the pulley grooves match the T10 profile.

When matching a timing belt, the profile and length are the critical dimensions. The T10 profile defines the tooth shape and spacing, while the 1960 mm length determines the belt's path around the pulleys. This belt has a 10 mm pitch, which is the distance between tooth centers. If your drive uses T10 pulleys and the current belt is marked T10 1960, this Optibelt Alpha Power belt is the correct replacement.

To confirm fit, inspect the old belt for a legible marking. Look for T10 and 1960 on the back of the belt. Also check the pulley teeth for wear and ensure they are clean and undamaged. If the marking is worn off, measure the belt length by running a tape around the outside of the belt, or count the teeth and multiply by the 10 mm pitch to verify the length. For a quote, send the part number T10 1960 and the quantity you need.

If you are replacing a belt on a drive with multiple belts, it is good practice to replace them as a set. This helps maintain even tension and load sharing. When ordering, provide the complete part number and any additional details from the old belt. Our team can help confirm the right belt or suggest an equivalent based on the information you provide.