Timing belt Optibelt T10 1600
- Brand
- OPTIBELT
- Category
- Power transmission
- Subcategory
- Timing belts
- Series
- Alpha Power
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
OPTIBELT T10 1600 belongs to timing belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for T10 1600 and any equivalents.
This Optibelt Alpha Power T10 1600 timing belt is a synchronous belt with a T10 profile, a 1600 mm length and a 10 mm pitch. Use these three values to match it to the belt you are replacing before you request a quote.
Start with the marking on the back of the belt you are removing. The profile, T10, and the length, 1600 mm, must match this belt. The pitch, 10 mm, is the distance between tooth centers and is set by the T10 profile, so it does not change from one T10 belt to another.
If the old marking is worn away, measure the length along the back of the belt and count the teeth to confirm the profile. A T10 belt has a 10 mm pitch, so the tooth count and the length go together. Send the part number T10 1600, or the profile and length you measured, and we will confirm it against this Optibelt Alpha Power belt.
This is a timing belt, also called a synchronous belt, so it drives by tooth engagement rather than friction. Check the pulleys for worn teeth, the flanges for damage and the tensioner for smooth movement while the belt is off. If the drive runs more than one belt, replace them as a set so the load stays even.
Dimensions
- Profile
- T10
- Pitch
- 10mm
- Length
- 1600mm
Frequently asked questions
- How do I match this belt to the one I am replacing?
- Read the marking on the back of the old belt. You need the profile, T10, and the length, 1600 mm. If the marking is gone, measure the length and count the teeth. Send those numbers and we will confirm the match.
- What does the 10 mm pitch mean on this belt?
- The pitch is the distance from one tooth center to the next. On a T10 profile belt the pitch is 10 mm, so any T10 belt has the same tooth spacing. The length, 1600 mm, is what changes between sizes.
- What should I send for a quote?
- Send the part number T10 1600, or the profile and length if you are working from a measurement. A photo of the back marking also helps. We reply by WhatsApp or email and can confirm the right belt or suggest an equivalent.