Timing belt Optibelt T10 1350
- Brand
- OPTIBELT
- Category
- Power transmission
- Subcategory
- Timing belts
- Series
- Alpha Power
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
OPTIBELT T10 1350 belongs to timing belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for T10 1350 and any equivalents.
When a timing belt has to be replaced, the marking on the back of the old belt is the fastest way to identify it. This page covers the Optibelt Alpha Power T10 1350, a synchronous belt with a T10 profile, a 1350 mm length and a 10 mm pitch.
Read the back of the belt before it goes in the trash. The printed line carries the profile and the length, and on this belt that reads T10 and 1350 mm. Copy the characters exactly as they appear, including any spacing, and note the belt width separately if the drive needs it confirmed. A photo of the marking works well when the print is worn or oily.
With that marking you can match the Optibelt Alpha Power T10 1350 directly. The T10 profile sets the tooth shape and the 10 mm pitch sets the spacing from tooth to tooth, while the 1350 mm length is the belt's own length. Those three values are what identify the belt, so they are the ones to check against the old part before ordering.
If the marking is unreadable or the drive has been modified, send what you can measure and describe. We carry the Optibelt line and can help confirm the right belt or suggest an equivalent from the profile, pitch and length you provide.
Dimensions
- Profile
- T10
- Pitch
- 10mm
- Length
- 1350mm
Frequently asked questions
- Where do I find the part number on the belt?
- It is printed on the back of the belt. On this belt the marking shows T10 and 1350, which correspond to the profile and the length in millimeters. Clean the surface and read it under good light before removing the belt.
- What do I send to request a quote?
- Send the marking from the back of the old belt, or the part number Optibelt Alpha Power T10 1350. If the print is gone, send the profile, the pitch and the length you measured so we can confirm the match.
- Can you help if the belt on the drive is not the original one?
- Yes. Send the marking from the belt currently fitted, along with the profile, pitch and length, and we will check it against the Optibelt Alpha Power T10 1350 or suggest an equivalent.