V-belt Optibelt SPZ 3000 RP

OPTIBELT SPZ 3000 RP belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for SPZ 3000 RP and any equivalents.

This Optibelt SPZ 3000 RP is a narrow wedge V-belt from the Red Power 3 S=C Plus series. It has an SPZ profile, a 3000 mm length, a 9.7 mm top width, an 8 mm height and a 40 degree angle. Use these figures to match it against the belt you are replacing.

Matching starts with the marking on the old belt. Read the profile and length from the back of the belt and compare them with the SPZ profile and 3000 mm length of this Optibelt SPZ 3000 RP. The top width of 9.7 mm, height of 8 mm and 40 degree angle describe the cross-section, so a belt that differs in any of these dimensions is not the same item.

Confirm the drive uses a narrow wedge V-belt and that the old belt carries the same profile and length before ordering. If the marking is worn or unreadable, measure the outside length and the top width of the old belt and send those figures with your request. We carry the Optibelt SPZ 3000 RP and can confirm it against the belt you are replacing.

Send the part number, the profile and the length by WhatsApp or email to request a quote. If the old belt is marked differently, include the marking and the measured dimensions so we can help confirm the right belt or suggest an equivalent.