V-belt Optibelt SPZ 2650
- Brand
- OPTIBELT
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- SPZ
- Series
- SK metric profile V-belts
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Other brands for this category
Ask us for alternatives. We check every equivalent against the part number and your application.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
OPTIBELT SPZ 2650 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for SPZ 2650 and any equivalents.
This Optibelt SPZ 2650 is a narrow wedge V-belt from the SK metric profile line, with a 2650 mm length and a 40-degree angle. It is built for compact, high-speed industrial drives where a standard-width belt would be too bulky for the pulley groove. Confirm the profile and length against your drive before ordering.
Narrow wedge belts like this SPZ profile are common on fans, pumps, compressors, machine tools and other auxiliary drives that run at higher speeds and need a smaller pulley envelope. The 9.7 mm top width and 8 mm height match the SPZ groove, so the belt seats correctly and wears evenly across the flanks.
To confirm fit, read the marking on the back of the old belt and compare the profile and length. The SPZ profile and 2650 mm length are the two dimensions that must match, along with the 40-degree angle. If the old belt is worn or the marking is unreadable, measure the outside length and check the pulley groove width before ordering.
Send the part number Optibelt SPZ 2650 by WhatsApp or email with a photo of the old belt marking if you have one. The team can confirm the profile and length and help you match the drive so you get the right belt for the application.
Dimensions
- Section
- SPZ
- Length
- 2650mm
Frequently asked questions
- What does the SPZ profile mean for fit?
- SPZ is a narrow wedge profile with a 9.7 mm top width, 8 mm height and 40-degree angle. It must match the pulley groove profile for the belt to seat and transmit load correctly.
- How do I confirm the length on my drive?
- Check the marking on the back of the old belt for the SPZ profile and 2650 mm length. If it is unreadable, measure the outside length and compare it to the 2650 mm datum.
- What information should I send for a quote?
- Send the part number Optibelt SPZ 2650 and, if possible, a photo of the old belt marking or the drive nameplate. That helps confirm the profile and length before you order.