V-belt Optibelt SPZ 2287
- Brand
- OPTIBELT
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- SPZ
- Series
- SK metric profile V-belts
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Other brands for this category
Ask us for alternatives. We check every equivalent against the part number and your application.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
OPTIBELT SPZ 2287 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for SPZ 2287 and any equivalents.
The Optibelt SPZ 2287 is a narrow wedge V-belt in the SK metric profile series, built for compact industrial drives that run at higher speeds than a classic V-belt section allows. This SPZ profile belt measures 2287 mm in length, with a 9.7 mm top width, 8 mm height and a 40 degree angle. It is a common fit on pumps, fans, compressors, machine tools and similar equipment where the drive is tight on space.
Narrow wedge belts such as this one transmit the same load through a smaller cross-section, so they suit drives designed around metric SPZ pulleys. Before ordering, read the marking on the back of the belt you are replacing and confirm the profile and length match: SPZ and 2287 mm. Also check the pulley grooves for wear, since a worn groove can make a new belt sit low and slip.
The same size is also listed under Gates SPZ 2287, which is useful when you are matching a belt already on the machine or comparing what a supplier stocks. If the old marking is unreadable, measure the outside length and the top width, then send those figures along with the equipment details so the team can confirm the right belt.
Send the part number, the profile and length from the back of the belt, and a photo of the drive if you have one. Quotes are handled by WhatsApp or email, and the team can help confirm the correct belt or suggest an equivalent when a direct match is not listed.
Dimensions
- Section
- SPZ
- Length
- 2287mm
Frequently asked questions
- How do I confirm this SPZ 2287 belt fits my drive?
- Check the marking on the old belt for SPZ and 2287 mm, then compare it with the pulley grooves and the belt's 9.7 mm top width and 8 mm height. If the marking is gone, measure the length and width and send those figures for confirmation.
- What is the difference between this belt and a classic V-belt?
- This is a narrow wedge V-belt in the SPZ profile, with a 40 degree angle. Narrow wedge belts use a smaller cross-section than classic V-belt sections, so they fit drives designed for metric SPZ pulleys and tighter spaces.
- Can I replace just one belt in a multi-belt drive?
- On a drive running two or more belts together, it is good practice to replace the set so all belts carry load evenly. Send the quantity and the part number, and the team will quote accordingly.