V-belt Optibelt SPZ 2137 RP
- Brand
- OPTIBELT
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- SPZ
- Series
- Red Power 3 S=C Plus
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
OPTIBELT SPZ 2137 RP belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for SPZ 2137 RP and any equivalents.
Replacing a narrow wedge V-belt starts with reading the marking on the old belt. This Optibelt SPZ 2137 RP from the Red Power 3 S=C Plus series matches when the profile and length agree. Confirm both before you request a quote.
The marking on the back of the belt gives you the profile and the length. This belt is profile SPZ, with a length of 2137 mm. Its top width is 9.7 mm, its height is 8 mm, and its angle is 40 degrees. If the old belt shows the same profile and length, this is the correct replacement.
If the marking is worn or unreadable, measure the old belt and check the drive. The profile must match the pulley groove, and the length must match the drive layout. Do not substitute a different profile or length. When in doubt, send the belt marking and photos of the drive.
We carry the Optibelt SPZ 2137 RP for maintenance, engineering and purchasing teams. To request a quote, send the part number, the quantity, and the old belt marking by WhatsApp or email. Our team replies promptly and can help confirm the right belt.
Dimensions
- Section
- SPZ
- Length
- 2137mm
Frequently asked questions
- How do I confirm this belt matches the one I am replacing?
- Read the marking on the back of the old belt. It must show profile SPZ and a length of 2137 mm. If it does, this belt matches. If the marking is unreadable, measure the old belt and check the drive before ordering.
- What are the dimensions of the Optibelt SPZ 2137 RP?
- Profile SPZ, length 2137 mm, top width 9.7 mm, height 8 mm, and angle 40 degrees. These are the values to compare against the belt being replaced.
- What should I send to request a quote?
- Send the part number Optibelt SPZ 2137 RP, the quantity you need, and the marking from the old belt. If the marking is worn, include photos of the drive and the old belt. Send by WhatsApp or email and our team will reply promptly.