V-belt Optibelt SPZ 1800 RP
- Brand
- OPTIBELT
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- SPZ
- Series
- Red Power 3 S=C Plus
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
OPTIBELT SPZ 1800 RP belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for SPZ 1800 RP and any equivalents.
This Optibelt SPZ 1800 RP is a narrow wedge V-belt from the Red Power 3 S=C Plus series. It has a profile of SPZ, a length of 1800 mm, a top width of 9.7 mm, a height of 8 mm, and a 40-degree angle. Use the marking on the belt you are replacing to match these values exactly.
To match a belt being replaced, read the marking on its back. Confirm the profile is SPZ and the length is 1800 mm. The top width is 9.7 mm, the height is 8 mm, and the angle is 40 degrees. If the old belt is worn or the marking is unreadable, measure the length and cross-check the profile before ordering.
This belt is a narrow wedge V-belt, also called a wedge belt. It is not a cogged belt, timing belt, Poly-V belt, double-V belt, banded belt, variable speed belt, or CVT belt. When replacing a belt on a drive with multiple belts, replace all belts in the set at the same time to keep the load even.
We carry the Optibelt SPZ 1800 RP. To request a quote, send the part number SPZ 1800 RP by WhatsApp or email. If you need help confirming the right belt, include the old belt marking and the drive details. Our team replies promptly and can suggest an equivalent if needed.
Dimensions
- Section
- SPZ
- Length
- 1800mm
Frequently asked questions
- How do I confirm this is the correct belt for my drive?
- Check the marking on the belt you are replacing. The profile should be SPZ and the length should be 1800 mm. The top width is 9.7 mm, the height is 8 mm, and the angle is 40 degrees. If the marking is not clear, measure the old belt and contact us with the details.
- What should I send to get a quote?
- Send the part number SPZ 1800 RP by WhatsApp or email. If you are replacing a belt, include the old belt marking and the drive details so we can help confirm the correct belt or suggest an equivalent.
- Should I replace all belts on the drive at once?
- When a drive uses multiple belts, replace the full set at the same time. Mixing new and worn belts can cause uneven loading and premature wear.