V-belt Optibelt SPZ 1412 RP
- Brand
- OPTIBELT
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- SPZ
- Series
- Red Power 3 S=C Plus
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
OPTIBELT SPZ 1412 RP belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for SPZ 1412 RP and any equivalents.
The Optibelt SPZ 1412 RP is a narrow wedge V-belt in the Red Power 3 S=C Plus series. It is identified by profile SPZ and a length of 1412 mm, with a top width of 9.7 mm, a height of 8 mm, and a 40-degree angle. This page helps you match it to the belt you are replacing.
To confirm the match, read the marking on the back of the old belt. You are looking for the profile SPZ and the length 1412 mm, along with the series Red Power 3 S=C Plus. The top width of 9.7 mm, height of 8 mm, and 40-degree angle are consistent with the SPZ profile. If the marking is worn or unreadable, measure the outside length and the top width where possible.
When the old belt is a Red Power 3 S=C Plus, the SPZ 1412 RP is the direct replacement by part number. If the drive uses multiple belts, replace the full set at the same time so the belts share the load evenly. Inspect the pulleys for wear, alignment, and any debris before installing the new belt.
MR Industrial Accessories LLC supplies this belt to maintenance, engineering, and purchasing teams across the United States, Canada, Mexico, and South America. To request a quote, send the part number Optibelt SPZ 1412 RP by WhatsApp or email. If you are unsure, include the old belt marking and a photo of the drive, and we will help confirm the right belt or suggest an equivalent.
Dimensions
- Section
- SPZ
- Length
- 1412mm
Frequently asked questions
- How do I confirm this is the right belt for my drive?
- Check the marking on the old belt for profile SPZ and length 1412 mm. The Optibelt SPZ 1412 RP has a top width of 9.7 mm, a height of 8 mm, and a 40-degree angle. If the old belt is a Red Power 3 S=C Plus in SPZ 1412, it is the direct replacement.
- Can I replace just one belt on a multi-belt drive?
- It is best practice to replace all belts in the set at the same time. Mixing a new belt with used belts can cause uneven load sharing and premature wear. Provide the quantity needed when requesting a quote.
- What information should I send to get a quote?
- Send the part number Optibelt SPZ 1412 RP, the quantity, and any details from the old belt marking. A photo of the drive and the old belt helps us confirm the profile and length. Contact us by WhatsApp or email.