V-belt Optibelt SPZ 1337 RP
- Brand
- OPTIBELT
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- SPZ
- Series
- Red Power 3 S=C Plus
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
OPTIBELT SPZ 1337 RP belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for SPZ 1337 RP and any equivalents.
This Optibelt SPZ 1337 RP is a narrow wedge V-belt from the Red Power 3 S=C Plus series. It is a raw-edge, 40-degree belt with a 9.7 mm top width and 8 mm height, specified at 1337 mm. Narrow wedge belts like this are used on compact, high-speed industrial drives where a standard V-belt would be too wide or too heavy.
Typical industrial drives for an SPZ profile include pumps, fans, compressors, machine tools and similar equipment where the pulley groove is cut for a narrow section. The 1337 mm length and SPZ profile are the two figures to match. Check the marking on the back of the old belt and compare it against the profile and length on this page before you order.
To confirm fit, inspect the drive while it is locked out. Look at the pulley grooves for wear, check that the belt sits correctly in the groove and runs without turning over, and confirm the center distance allows the belt to be tensioned properly. If the old belt is stretched, cracked at the ribs or glazed on the sides, replace it rather than re-tensioning it.
On drives with more than one belt, replace the full set at the same time so the load is shared evenly. Send the part number, the profile and the length, and the quantity of belts you need, by WhatsApp or email. The team can confirm the right belt or suggest an equivalent and reply with a quote.
Dimensions
- Section
- SPZ
- Length
- 1337mm
Frequently asked questions
- How do I confirm this Optibelt SPZ 1337 RP fits my drive?
- Match the profile and length from the belt marking or the equipment manual. This belt is SPZ profile at 1337 mm. Also check the pulley groove condition and the drive center distance before fitting.
- What does the Red Power 3 S=C Plus series indicate?
- It is the Optibelt series name for this narrow wedge V-belt. The belt is a 40-degree section with a 9.7 mm top width and 8 mm height, as listed in the data.
- What should I send to get a quote?
- Send the part number SPZ 1337 RP, the profile SPZ, the length 1337 mm and the quantity you need by WhatsApp or email. The team will confirm the belt or suggest an equivalent.