V-belt Optibelt SPZ 1287 RP
- Brand
- OPTIBELT
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- SPZ
- Series
- Red Power 3 S=C Plus
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
OPTIBELT SPZ 1287 RP belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for SPZ 1287 RP and any equivalents.
When a drive belt needs replacing, the most reliable starting point is the marking on the back of the old belt. This page covers the Optibelt SPZ 1287 RP, a narrow wedge V-belt from the Red Power 3 S=C Plus series. Use the figures below to confirm it matches your drive before requesting a quote.
The Optibelt SPZ 1287 RP is a narrow wedge V-belt with an SPZ profile and a length of 1287 mm. Its top width is 9.7 mm, its height is 8 mm, and its angle is 40°. These dimensions identify the belt; the part number on the back of your existing belt should correspond to them.
To confirm a match, read the marking on the old belt and compare it with the profile and length above. If the marking is worn or unreadable, measure the top width and the outside length, and note the drive's sheave groove profile. The SPZ profile and 1287 mm length are the key values to check.
We carry the Optibelt SPZ 1287 RP for maintenance, engineering and purchasing teams. Send the part number, the belt marking, or your measurements by WhatsApp or email, and our team will help confirm the right belt or suggest an equivalent.
Dimensions
- Section
- SPZ
- Length
- 1287mm
Frequently asked questions
- How do I confirm the Optibelt SPZ 1287 RP is the right belt?
- Read the marking on the back of the old belt. It should show the SPZ profile and a 1287 mm length. Also check the top width (9.7 mm), height (8 mm) and 40° angle against the belt you are replacing.
- What should I send to request a quote?
- Send the part number, the full marking from the old belt, or your measurements: profile, length in mm, top width and height. Photos of the belt and the drive sheaves help us confirm the match.
- Can you help if the marking on my old belt is unreadable?
- Yes. Measure the top width and the outside length, and note the sheave groove profile. Send those details by WhatsApp or email and we will help identify the correct belt or a suitable equivalent.