V-belt Optibelt SPZ 1202 RP

OPTIBELT SPZ 1202 RP belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for SPZ 1202 RP and any equivalents.

This Optibelt SPZ 1202 RP belt is a narrow wedge V-belt from the Red Power 3 S=C Plus series. The SPZ profile and 1202 mm length identify it for drives that require a compact, high-capacity belt.

The SPZ profile is a narrow wedge section with a 9.7 mm top width, 8 mm height and 40° angle. This geometry allows the belt to transmit higher power in a smaller cross-section than a classic V-belt of similar top width. The 1202 mm length is the datum length for matching the drive.

When replacing an SPZ 1202 RP, confirm the profile and length on the old belt. The marking on the back typically shows the profile and length; if it is worn, measure the top width and the outside length to compare against the 9.7 mm and 1202 mm values. The Red Power 3 S=C Plus construction is designed for drives where a single belt may be replaced individually, but check the drive manufacturer's guidance if multiple belts run in a set.

For a quote, send the part number SPZ 1202 RP, the quantity, and any drive details you have. If the belt is not legible, provide the profile and length from the drive nameplate or the old belt. We carry Optibelt belts and can help confirm the SPZ 1202 RP for your application.