V-belt Optibelt SPC 2240 BP2
- Brand
- OPTIBELT
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- SPC
- Series
- Blue Power 2
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
OPTIBELT SPC 2240 BP2 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for SPC 2240 BP2 and any equivalents.
When you need to match a narrow wedge V-belt, the marking on the old belt is your starting point. The Optibelt SPC 2240 BP2 from the Blue Power 2 series gives you a clear profile and length to compare against. Check that the belt you are replacing carries the same SPC profile and 2240 mm length before you order.
Confirm the profile first. SPC is a narrow wedge profile, and it must match the sheave groove. If the old belt is worn or the marking is unreadable, measure the length and compare it to the 2240 mm datum. The belt code SPC 2240 BP2 combines both values, so you can cross-check the profile and length in one step.
Inspect the drive while the belt is off. Look for uneven wear, cracks, glazing, or missing cogs. Check sheave grooves for wear or debris, and verify alignment and tension. Replacing a single belt on a multi-belt drive can lead to uneven load sharing, so examine all belts in the set and replace them together when wear is similar.
If you are unsure about the exact replacement, send the belt marking, the drive model, and the sheave dimensions. We carry the Optibelt SPC 2240 BP2 and can help confirm the right belt or suggest an equivalent. Request a quote by part number through WhatsApp or email.
Dimensions
- Section
- SPC
- Length
- 2240mm
Frequently asked questions
- What details do I need to match this belt?
- You need the profile and length. This belt is SPC profile with a 2240 mm length. Check the marking on the back of the old belt for the same values.
- Can I replace just one belt on a multi-belt drive?
- It is best to replace all belts in the set at the same time. Mixing new and worn belts can cause uneven tension and load sharing. Inspect the full set before ordering.
- How do I request a quote?
- Send the part number SPC 2240 BP2, the quantity, and any drive details by WhatsApp or email. Our team will reply promptly.