V-belt Optibelt SPC 11200
- Brand
- OPTIBELT
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- SPC
- Series
- SK metric profile V-belts
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Other brands for this category
Ask us for alternatives. We check every equivalent against the part number and your application.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
OPTIBELT SPC 11200 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for SPC 11200 and any equivalents.
The Optibelt SPC 11200 is a narrow wedge V-belt in the SK metric profile series, with a length of 11200 mm. Before you fit it, inspect the drive and sheaves so the new belt runs true and wears evenly.
Check sheave grooves for wear, rust, or embedded debris. Worn grooves let the belt sit too deep, which causes slip and heat. Confirm the sheaves are aligned and the shafts turn freely. Look for oil or grease on the drive; clean any contamination before installation.
Verify the old belt marking against the Optibelt SPC 11200: profile SPC and length 11200 mm. A belt that has been running may measure differently, so use the back marking as your reference. If the marking is unreadable, measure the outside length and confirm the profile before ordering.
When you request a quote, send the part number SPC 11200, the profile, and the length. If you are replacing a set, note how many belts the drive uses. Our team can confirm the belt or suggest an equivalent based on the data you provide.
Dimensions
- Section
- SPC
- Length
- 11200mm
Frequently asked questions
- What should I check on the drive before fitting this belt?
- Inspect sheave grooves for wear, rust, or debris, and confirm alignment. Clean any oil or grease from the drive. Check that shafts turn freely and that the belt tensioning system works.
- How do I confirm the old belt matches the Optibelt SPC 11200?
- Look for the profile and length marking on the back of the old belt. The SPC 11200 has profile SPC and length 11200 mm. If the marking is worn, measure the outside length and confirm the profile.
- What information should I send for a quote?
- Send the part number SPC 11200, the profile SPC, and the length 11200 mm. If the drive uses multiple belts, include the number of belts in the set.