V-belt Optibelt SPB 7100 RP
- Brand
- OPTIBELT
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- SPB
- Series
- Red Power 3 S=C Plus
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
OPTIBELT SPB 7100 RP belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for SPB 7100 RP and any equivalents.
When you need to replace a narrow wedge V-belt, start by reading the marking on the back of the old belt. This page covers the Optibelt SPB 7100 RP from the Red Power 3 S=C Plus series, a belt we carry for industrial drives. Use the marking to confirm the profile and length before you request a quote.
The Optibelt SPB 7100 RP is a narrow wedge V-belt with an SPB profile and a length of 7100 mm. Its top width is 16.3 mm, its height is 13 mm, and its angle is 40 degrees. These dimensions are the key details to match when selecting a replacement.
The marking on the back of the old belt usually shows the profile and length. If it reads SPB and 7100 mm, this belt matches those figures. If the marking is worn or unreadable, measure the top width and the outside length of the old belt and compare them to the values above. The Red Power 3 S=C Plus series name may also appear in the marking.
To request a quote, send the part number SPB 7100 RP by WhatsApp or email. If you are unsure whether this is the correct belt, include the old belt's marking or your measurements and the team will help confirm the right belt.
Dimensions
- Section
- SPB
- Length
- 7100mm
Frequently asked questions
- What details should I check on the old belt before ordering?
- Read the marking on the back of the old belt. Look for the profile SPB and the length 7100 mm. If the marking is not clear, measure the top width, height and outside length and compare them to the values on this page.
- What are the dimensions of the Optibelt SPB 7100 RP?
- It has an SPB profile, a length of 7100 mm, a top width of 16.3 mm, a height of 13 mm and an angle of 40 degrees.
- How do I request a quote for this belt?
- Send the part number SPB 7100 RP by WhatsApp or email. If you need help confirming the right belt, include the marking from the old belt or your measurements.