V-belt Optibelt SPB 6300 RP
- Brand
- OPTIBELT
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- SPB
- Series
- Red Power 3 S=C Plus
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
OPTIBELT SPB 6300 RP belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for SPB 6300 RP and any equivalents.
The Optibelt SPB 6300 RP is a narrow wedge V-belt from the Red Power 3 S=C Plus series. It has an SPB profile, a 6300 mm length, a 16.3 mm top width, a 13 mm height, and a 40° angle.
To match this belt to the one being replaced, start by reading the marking on the back of the old belt. If it shows SPB 6300 RP, this is the direct match. If the marking is worn or missing, measure the old belt's length and compare it to 6300 mm. Also confirm the profile is SPB and the top width is near 16.3 mm.
When measuring, keep the belt relaxed and follow the same path it runs on the drive. A belt that has stretched or worn may not measure exactly, so use the original marking whenever possible. If you are unsure, send the full part number and the drive details for confirmation.
For a quote, provide the part number SPB 6300 RP and the quantity needed. If you are replacing multiple belts on the same drive, include all part numbers so the set can be reviewed together. Our team can help confirm the correct belt or suggest an equivalent.
Dimensions
- Section
- SPB
- Length
- 6300mm
Frequently asked questions
- How do I confirm this is the right belt for my drive?
- Check the marking on the back of the old belt for SPB 6300 RP. If it is unreadable, measure the length and compare it to 6300 mm, and verify the profile is SPB with a top width near 16.3 mm.
- What details should I send for a quote?
- Send the part number SPB 6300 RP, the quantity, and any other belt part numbers if you are replacing a set. If you have the old belt's marking or measurements, include those as well.
- Can you help if the old belt marking is worn off?
- Yes. Provide the drive information and any measurements you can take from the old belt. Our team can help confirm the correct belt or suggest an equivalent.