V-belt Optibelt SPB 6000 RP
- Brand
- OPTIBELT
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- SPB
- Series
- Red Power 3 S=C Plus
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
OPTIBELT SPB 6000 RP belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for SPB 6000 RP and any equivalents.
The Optibelt SPB 6000 RP is a narrow wedge V-belt from the Red Power 3 S=C Plus series. It is built to the SPB profile with a 6000 mm length, 16.3 mm top width, 13 mm height and 40° angle. Use these figures to match the belt being replaced.
Start by reading the marking on the back of the old belt. Confirm the profile is SPB and the length is 6000 mm, then check the top width of 16.3 mm and the height of 13 mm against the new belt. The 40° angle is part of the SPB profile and should match the pulley groove.
If the old belt is worn or the marking is unreadable, measure the outside length and the cross-section. A belt that is too wide will not sit correctly in the groove, and one that is too narrow will slip. The SPB 6000 RP gives you a fixed reference for profile and length.
When you request a quote, send the part number SPB 6000 RP and the belt marking. If you are replacing more than one belt on the same drive, include the quantity and the drive position. We carry the Optibelt SPB 6000 RP and can help confirm it fits your application.
Dimensions
- Section
- SPB
- Length
- 6000mm
Frequently asked questions
- How do I confirm the SPB 6000 RP is the right belt for my drive?
- Check the old belt marking for SPB and 6000 mm. Measure the top width and height if the marking is worn. The SPB 6000 RP has a 16.3 mm top width, 13 mm height and 40° angle.
- What should I send with my quote request?
- Send the part number SPB 6000 RP, the belt marking, and the quantity needed. If the drive uses multiple belts, note the position and total count.
- Can I replace a single belt on a multi-belt drive?
- On a drive with several belts, replacing all belts at the same time helps keep tension even. Send the full set quantity when you request a quote.