V-belt Optibelt SPB 5300 RP
- Brand
- OPTIBELT
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- SPB
- Series
- Red Power 3 S=C Plus
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
OPTIBELT SPB 5300 RP belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for SPB 5300 RP and any equivalents.
This Optibelt SPB 5300 RP is a narrow wedge V-belt from the Red Power 3 S=C Plus series. It is built for industrial drives where a compact, high-capacity belt is needed. The profile is SPB, the length is 5300 mm, and the cross-section measures 16.3 mm top width by 13 mm height with a 40° angle.
Narrow wedge V-belts like this SPB profile are common on heavy-duty industrial equipment such as compressors, fans, pumps, and process machinery. The SPB profile fits pulleys machined for SPB grooves, and the 5300 mm length suits long center-distance drives. The 40° angle is the standard wedge angle for this profile.
To confirm fit, check the old belt marking or measure the drive. Look for the profile and length on the belt back, and verify the pulley groove is SPB. The top width of 16.3 mm and height of 13 mm are key dimensions to match. If the old belt is worn or stretched, compare its length to the 5300 mm specification.
Dimensions
- Section
- SPB
- Length
- 5300mm
Frequently asked questions
- What does the SPB profile mean for my drive?
- SPB is a narrow wedge profile. It requires pulleys with SPB grooves. The belt has a 16.3 mm top width, 13 mm height, and 40° angle.
- How do I confirm this belt fits my equipment?
- Check the old belt for the SPB profile and 5300 mm length. Also verify the pulley groove matches SPB dimensions. If unsure, send us the part number from the old belt and photos of the drive.
- Can I use this belt on a drive that originally had a different profile?
- No. The pulley grooves must match the SPB profile. Using a different profile can cause premature wear or poor performance. Always match the profile and length to the drive requirements.