V-belt Optibelt SPB 3250 RP
- Brand
- OPTIBELT
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- SPB
- Series
- Red Power 3 S=C Plus
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
OPTIBELT SPB 3250 RP belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for SPB 3250 RP and any equivalents.
This Optibelt SPB 3250 RP is a narrow wedge V-belt from the Red Power 3 S=C Plus series. It has an SPB profile and a length of 3250 mm. The belt is 16.3 mm wide at the top, 13 mm high, and has a 40-degree angle.
The easiest way to confirm this is the belt you need is to read the marking on the back of your old belt. Look for the profile and length: SPB and 3250 mm. If those match, the Optibelt SPB 3250 RP is the correct replacement. Note any other characters on the old belt, as they may help identify the series.
When you contact us, send the part number SPB 3250 RP and, if possible, a photo of the old belt's marking. We carry the Optibelt Red Power 3 S=C Plus line and can confirm the SPB profile and 3250 mm length against your application. If your old belt is unreadable, provide the drive's pulley dimensions and center distance so we can help verify the correct belt.
For drives using multiple belts, inspect all belts for wear and replace them as a set. This Optibelt narrow wedge V-belt has a 40-degree angle and a top width of 16.3 mm, with a height of 13 mm. These dimensions are critical for proper fit in the pulley grooves. Always compare the old belt's marking to the new belt before installation.
Dimensions
- Section
- SPB
- Length
- 3250mm
Frequently asked questions
- How do I read the marking on my old belt?
- Look for the profile and length on the back of the belt. For this Optibelt SPB 3250 RP, the marking should include SPB and 3250 mm. If you see those, it matches this belt.
- What if my old belt's marking is worn off?
- Measure the top width and height of the old belt, and note the pulley groove dimensions. Contact us with those details and the drive's center distance. We can help confirm if the SPB 3250 RP is the right fit.
- Can I replace just one belt in a multi-belt drive?
- It is best to replace all belts in a set at the same time. Mixing new and worn belts can cause uneven tension and premature failure. Order the number of belts your drive requires.